Supercam

Supercam
Supercam
Supercam

SuperCam is a 4K- AGX Xavier based Edge AI camera

  • Impact Resistant Polycarbonate Thermoplastic
  • IP66 rated against dust, water, and salt water air
  • Extreme heat protection as high as 167° F (75° C)
  • 4056H x 3040V resolution
  • 12 * 4K @ 24 FPS receptor cameras 
  • Opto-isolated GPIO
  • 2TB - 3.4TB NVME storage 
  • 5G Support
AGX Xavier has the performance to handle visual odometry, sensor fusion, localization and mapping, obstacle detection, and path planning algorithms critical to next-generation workloads. Get GPU workstation performance with up to an unparalleled 32 TeraOPS (TOPS) of peak compute and 750 Gbps of high-speed I/O in a compact form factor.

SuperCam is supported by a SmartCow IVA stack called samaritan​. Not only does it allow efficient video processing, it also allows developers to do seamless sensor fusion.

Sensor fusion​ process of combining data from multiple sensors into information that is more accurate, complete, and dependable than each of the individual contributing sensors’ data. Camera has analog and serial input with an isolated protection. 

SuperCam, internally reduces damaging heat buildup by transferring heat away from sensitive cameras and other components. SuperCam actively cools while still being an air and watertight protective housing. It is designed for the world’s toughest and hottest climates and is available with a stainless steel arm.

AGX Xavier

Jetson AGX Xavier offers big workstation performance at 1/10 the size of a workstation. 

  • GPU: 512-core Volta GPU with Tensor Cores
  • CPU: 8-core ARM v8.2 64-bit CPU, 8MB L2 + 4MB L3
  • Memory: 32GB 256-Bit LPDDR4x | 137GB/s
  • Storage: 32GB eMMC 5.1 , 2 TB NVME, 3.4 TB NVME
  • DL Accelerator: (2x) NVDLA Engines
  • Receptor cameras: 8*4k @ 24 FPS, 30*1080P * 30 FPS(H264)

Sensor Specifications:

The IMX577 from Sony Corporation is a diagonal 7.857 mm, 12.3 megapixel CMOS Image Sensor with a square pixel array. It adopts Sony’s Stacked CMOS Image Sensor technology to achieve high-speed image capturing.

  • Active pixels: 4056H x 3040V
  • Focal length: 5.0 mm
  • Aperture: F/#: 2.2
  • IR cut filter: Built in 650nm
  • FOV (D/H/V): 96.5° / 80° /61.5°
  • TV Distortion: < -8%
  • Pixel size: 1.55 um x 1.55 um

Analog Inputs(Optional):

Analog to digital converter peripheral board for the embedded market. With 16 ADC input channels and 16-bit resolution, this product is ideal for data acquisition, measurement and control applications.

  • Channels: 16 Single Ended, in two groups
  • Resolution Sampling Rate: 16-bit
  • Sample & Hold: N/A
  • Protection Impedance Ranges: 500 Ksps (per group) 62.5 Ksps (per channel)
  • Accuracy:  ±2.5 LSB INL, ±1.5 LSB DNL
  • Signal-to-Noise Ratio: 91 dB @ ±10.24V

Serial Input(Optional):

switchable RS-232/422/485, optional isolation and full modem control signals. The wide operating temperature and latching connector and cabling solution allow these modules to be used in harsh environments.

  • Electrical Interface: Hardware or software selectable RS-232/422/485
  • Host Bus:PCI Express
  • Connectors: Mini Tek, 2mm, 2 x 10 pins
  • Isolation:500V
  • Control Signals:RS-232: TxD, RxD, RTS, CTS, DTR, DCD, DSR, RI RS-422/485: TxD+/-, RxD+/-
  • Baud Rate:RS-232: 50 bps to 921.6 Kbps RS-422/485: 50 bps to 1Mbps Optional to 20Mbps Slow Slew Rate: 250Kbps
  • Interrupts: Assigned by Plug and Play resources
  • Memory Addresses: Assigned by Plug and Play resources
  • UART Type: Dual PCIe UARTs with up to 256 byte transmit and receive FIFO buffers for each port

5G Specifications: 

• Support of 5G Sub-6 FDD and TDD and mmWave
• Support of SA & NSA operations, 5G core network Opt. 3a/3x and Option 2
• 4G/5G Rel. 15
• 4G Cat. 20 up to 7CAs
• 3G HSPA+ Rel 18
• State of the art GNSS receiver

Turnkey soloutions available from SmartCow

  • Turn around time optimization (shipping container ocr)
  • Road Master(Indian traffic violation & ALPR)

 

 

Copyrights © 2020 All Rights Reserved by Smartcow.